HE - 3000
HE-3000 is formulated with a special blend of Portland cement and polymers. HE-3000 is suitable for filling, smoothing and levelling of suitable substrates before applying parquet, ceramic tiles and plastic floor coverings.
Uses
- Department store
- Sidewalk
- light-duty floor, underlayment for wooden floor
- ceramic tile, carpet
- plastic floor, etc.
Advantages
- Self levelling
- Easy application
- Seamless
- Dust-proof
Application instructions
1. Substrate quality / Pre-treatment
- The compressive strength of the concrete substrate should be at least 3,000 psi at 28 days with a minimum tensile strength of 15 kgf/cm².
- Substrate water content is less than 8%.
- Surface treatments or any friable areas of the subfloor must be mechanically removed.
- All substrate must be dry, stable, sound and free of all contaminants such as grease, oil, paint, wax, dust, curing and sealing compounds that will interfere with the penetration the primer.
2. Priming
- Apply on dry substrate using a suitable tool such as a roller, squeegee or brush. Avoid formation of puddles.
- Note: A second application is recommended on high porosity, unsound or very absorbent substrates.
3. Mixing
- Pour 5~5.5 kg of clean, cool potable water into a suitably sized and clean mixing container, ensuring strict control of the water content (do not over-water).
- Add HE-3000 to the water, while slowly mixing, adding the complete contents of the bag.
- Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend water and powder for approximately 2~3 minutes, until a lump-free and uniform mix has been produced.
- Note：Operating time: 10 ~ 15 minutes (temperature: + 15 ~ + 35 ° C)
4. Application
- Pour the mix and spread evenly, and control the material thickness by scrape rake.
- Even surfaces by smoothing trowel.
- Roll immediately with a spiked roller to ensure even thickness and achieve defoaming effect.
5. Consumption
- 1.8 ~ 2 kg/mm/m²
- Note：This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage etc.
6. Cleaning of tools
- Clean all tools and application equipment with water immediately after use.
- Hardened / cured material can only be removed mechanically.
HE-3000
HE-3000
HE-3000
Technical Information
Packaging / Storage
HE-3000：25 kg/paper bag
- Shelf Life：6 months from date of production if stored properly in original, unopened and undamaged sealed packaging
- Store dry at +5~+35 °C Protect from moisture, direct sunlight, flame sources and freezing.