Waterproof materials

  1. Waterproof materials
CS-200

CS-200

Chanye - heat stop - CS-200
undefined
/
undefined
/
undefined
/
undefined
/
undefined
/
undefined
/
  • heat stop-CS-200
  • heat stop-CS-200
  • heat stop-CS-200
  • heat stop-CS-200
  • heat stop-CS-200
  • heat stop-CS-200
DETAIL
 

CS - 200

Heat Stop CS-200 is a waterproof, high performance elastomeric resin coating that with High Slolar Reflective effects, our Heat Stop CS-200 utilizes natural mineral based technology which enhances it’s performance and life .It is a seamless, flexible film that prevents water penetration, corrosion, surface deterioration and excellent solar reflectivity for extended roof life.It offers superior solar reflectance and UV resistance. Benefits range from reduced solar radiation, energy saving, extends the life of the substrate, and improves worker comfort which in turn increases productivity.

Uses

   
 
  • Concrete,Cement , Galvanized iron sheet, Polycarbonate
  • Plastic, Asbestos, Asphalt membrane sheet etc.

Advantages

 
 
  • Solar reflectance 87% above (JIS-K5602)
  • Save energy costs,reduce A/C cost up to 30%
  • Drastic reduction of roof heat up to15 degree C in peak summer
  • Eco-friendly solution( non hazardous/ toxic substance,low VOC)
  • Ultraviolet resistance
  • Anti-corrosion, Easy to clean, Excellent weather resistance
  • Dirt repel
  • Sound reduce
  • Island heat resistance
  • Low cost application and maintenance

Application instructions

    
 

1. Substrate quality / Pre-treatment

  • Heat Stop CS-200 can be applied to metal, concrete and asphalt membrane sheet.
  • The compressive strength of the concrete substrate should be at least 3,000 psi at 28 days with a minimum tensile strength of 15 kgf/cm².
  • Substrate water content is less than 8%.
  • Surface treatments or any friable areas of the subfloor must be mechanically removed.
  • All substrates must be dry, stable, sound and free of all contaminants such as grease, oil, paint, wax, dust, curing and sealing compounds that will interfere with the penetration the primer.
  • Metal surfaces must be removed from rust.
  • Replace all void,crack,edges and angles with galvanized iron sheet 
  • Before Heat Stop CS-200 applied ,all substrate must be coat primer with Chanye Primer-G.

 

2. Application

  • Cross coating on the construction surface with roller or brush also can apply by machine spray.
  • After the first application of Chanye-CS-200, wait 4-8 hours (+23°C) before applying the second application.
  • Note：Operating time: 2 hours (temperature: + 15 ~ + 35 ° C).

 

3. Consumption

  • Dependent on the application area,substrate roughness,surface profile and thickness.
  • 0.6kg/mm/m2 (one coat).
  • Heat Stop CS-200 must be applied in minimum 2 coats.

 

4. Cleaning of tools

  • Clean all tools and application equipment with water immediately after use.
  • Hardened / cured material can only be removed mechanically.

CS-200
CS-200
CS-200

Technical Information



Packaging / Storage

   
 

 CS-200：20 kg/bucket
 

  • Shelf Life：12 months from date of production if stored properly in original, unopened and undamaged sealed packaging
  • Store dry at +5~+35 °C Protect from moisture, direct sunlight, flame sources and freezing.
- measured value -
 

July 15, 2021 13:00～14:00 p.m.

July 15, 2021 13:00～14:00 p.m.

 July 19, 2021 15:00～16:00 p.m.

coated  V.S uncoated
Back