M2
Chanye plug-M2 is cementitious,ready-mixed,rapid setting compound to stop water and moisture ingress and can be used on the following substrates:concrete,masonry,earthenware,stone
Uses
- Water tank.
- Swimming pool.
- Seal crack,tie holes,and other defects in concrete.
- Underground structure e.g.underground car park,lift shafts,garage pits.manhole.
Advantages
- Easy to use,easy to mix,just add water.
- No special equipment required.
- Rapid hardening 30 seconds after mixing.
- Stop water flow
- Can be used underwater.
- No corrosion.
Application instructions
1. Substrate quality / Pre-treatment
- All substrate must be clean, sound and free of all contaminants.
- It must be buried to eliminate the water pressure in case of large water leaking.
- Cut concrete or rock in “V” shape around the leaking point..
2. Application
- Add 1kg M2 to the appropriate 0.25 liter of water and mixing time is about 15 seconds into a paste.
- When M2 is slightly hot, it quickly plugs the water outlet, and then hold firmly in place for about 30 seconds.
- Maintain pressure without disturbing the material,until it has set,it hardens quickly after 30 seconds to 1 minute.
- Note: If you need to condense quickly, the amount of water can be adjusted according to the hardening speed.
3. Cleaning of tools
- Clean all tools and application equipment with water immediately after use.
- Hardened / cured material can only be removed mechanically.
M2
M2
M2
Technical Information
Packaging / Storage
M2：20 kg / bucket
- Shelf Life：6 months from date of production if stored properly in original, unopened and undamaged sealed packaging
- Store dry at +5~+35 °C Protect from moisture, direct sunlight, flame sources and freezing.
- NOTE：Chanye plug M2 is alkaline.use rubber gloves when working it.