ES - 250
ES-250 is elastomeric resin based one-component ready-to-use coating that can be rolled or sprayed onto horizontal and vertical surfaces on various substrates.in above-grade applications,these waterproofing membranes prevent water intrusion in to construction elements.
Uses
- Interior and exterior waterproofing and damp-proofing of concrete,cementitious rendering,brickwork and blockwork.
- Waterproofing of basement walls and cellars.
- Roof,terraces and balconies.
- Retaining walls,RC gutters and planter boxes.
- Concrete adjacent joint.
- Bathroom, toilets, kitchen.
- Lift pits.
- Packing deck.
Advantages
- Friendly to environment/ human with its water based.
- Exellent quality with strength and flexibility.
- Easy,safe and speed work with its water based.
- Seamless and monolithic..
- Crack bridging.
- Hand or spray applied.
Application instructions
1. Substrate quality / Pre-treatment
- The compressive strength of the concrete substrate should be at least 3,000 psi at 28 days with a minimum tensile strength of 15 kgf/cm².
- Substrate water content is less than 8%.
- Surface treatments or any friable areas of the subfloor must be mechanically removed.
- All substrates must be dry, stable, sound and free of all contaminants such as grease, oil, paint, wax, dust, curing and sealing compounds that will interfere with the penetration the primer.
- Fill all void,crack,edges and angles with Chanye HE-3700 repair mortar.
- Before applied Chanye-elastic-CS-400,all substrate must be coat primer with Chanye Primer-G.
2. Application
- Cross coating on the construction surface with roller or brush also can apply by machine spray.
- After the first application of Chanye-elastic-ES-250, wait 4-8 hours (+23°C) before applying the second application.
- At least 24 hours after the coating is completed, the follow-up work can be carried out (it can be applied with external tiles, covered with cement mortar or painted with water-based waterproof topcoat).
- Note：Operating time: 2 hours (temperature: + 15 ~ + 35 ° C)
3. Consumption
- Dependent on the application area,substrate roughness,surface profile and thickness.
- 0.6 kg / mm / m2 (one coat)
- ES-250 must be applied in minimum 2 coats.
- 3 coats may be required in areas of extremely high infiltration.
4. Cleaning of tools
- Clean all tools and application equipment with water immediately after use.
- Hardened / cured material can only be removed mechanically.
PRIMER-G
ES-250
ES-250
Technical Information
Packaging / Storage
ES - 250 : 18 kg / bucket
- Shelf Life：12 months from date of production if stored properly in original, unopened and undamaged sealed packaging
- Store dry at +5~+35 °C Protect from moisture, direct sunlight, flame sources and freezing.