Decoration materials

  1. Decoration materials
TG-33

TG-33

Chanye -Tile grout - TG-33
undefined
/
undefined
/
undefined
/
  • Tile Grout TG-33
  • Tile Grout TG-33
  • Tile Grout TG-33
DETAIL

TG - 33

TG-33 is made from a blend of cement, polymer, additive, pigment, fine-graded aggregates. It is a fine powder, requiring only an addition of water to produce a smooth paste suitable for grouting ceramic tiles and similar applications. Its characteristics that allow for easy filling and compacting into the tile and stone joints and provide stability and aesthetic function.

Uses

   
  
Bonding tiles for the following applications：
  • Balconies、 Bathrooms、Kitchens.
  • Commercial、Industrial、Residential environments.
  • Facades.
  • Shopping malls.
  • Overlaying existing indoor sound ceramic tiles or stones.

Advantages

 
 
  • Easy application
  • Easy to clean
  • Mold and mildew resistance
  • Good RC binding
  • Low water absorption

Application instructions

    
 

1. Substrate quality / Pre-treatment

  • All substrate must be dry, stable, sound
  • Before grouting, make sure the tiles or stones are firmly set and the adhesive or mortar is completely dry.
  • It must be applied 24 hours after pasting tiles.

 

2. Mixing

  • Pour 6.25-6.75 kg of clean, cool potable water into a suitably sized and clean mixing container, ensuring strict control of the water content (do not over-water).
  • Add TG-33 to the water, while slowly mixing, adding the complete contents of the bag.
  • Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend water and powder for approximately 2~3 minutes, until a lump-free and uniform mix has been produced.

 

3. Application

  • Force TG-33 into the joints with a rubber grout float. Make sure all joints are well compacted and free of voids and gaps.
  • Remove excess grout from the tile surface, moving the grout float diagonally to the joints while the TG-33 is still fresh.
  • Note: Operating time: 20-30 minutes (temperature: + 15 ~ + 35 ° C)

 

4. Consumption

 

5. Cleaning of tools

  • Clean all tools and application equipment with water immediately after use. 
  • Hardened / cured material can only be removed mechanically.

Uncoated
TG-33
TG-33

Technical Information



Packaging / Storage

   
 

 TG - 33 : 25 kg/paper bag

 

  • Shelf Life：12 months from date of production if stored properly in original, unopened and undamaged sealed packaging
  • Store dry at +5~+35 °C Protect from moisture, direct sunlight, flame sources and freezing.
 
Back